手順3に変更
- Christopher Antounによって編集
承認済みの編集 : Christopher Antoun
- 前
- 後
- 変更なし
手順ライン
| - | [* red] On the front of the Disk Drive, below the eject button, insert a pin into the hole. |
|---|---|
| + | [* icon_note] This step is only necessary if there is a disc stuck inside the drive! If you are replacing the drive and do not need to remove a disc, this can be skipped. |
| + | [* red] On the front of the Disk Drive, below the eject button, insert a pin or paperclip into the hole. |
| [* black] Push the pin into hole until the Disk Drive pops out. |