メインコンテンツにスキップ

手順1に変更

Knutさんによる編集

承認の保留中

変更なし

手順ライン

[* black] Follow step 1-6 of this guide.[guide|4758]
[* black] This will enable the logic board just where you need it.
+[* black] If you are uncertain if the EM10 is broken, measure the two sides to see if the are connected. If everything is OK you should have about 0 Ohm both between the two cyan marked solderings and between the two yellow ones. You should NOT have connection between cyan and yellow.

画像1

以前の画像はありません

追加

画像2

以前の画像はありません

追加