メインコンテンツにスキップ

手順6に変更

Rene Jeddoreさんによる編集

承認済みの編集 : Rene Jeddore

変更なし

手順ライン

+[title] Separate the gimbal
[* black] Carefully lift the covers off the gimbal. There is a bearing here that can fall out, be careful not to lose it.
[* black] As you lift the parts be very gentle as there is a ribbon cable attaching the camera to the main circuit board. The metal plates lift out of the way and the gimbal is now in two pieces.