メインコンテンツにスキップ

手順3に変更

Rene Jeddoreさんによる編集

承認済みの編集 : Rene Jeddore

変更なし

手順ライン

+[title] Remove the gimbal from the Phantom
[* black] Simply lift the gimbal out of the rubber mounts and fold back towards the front end of the Phantom.
[* black] Use a small tool to press the clip holding in the smallest connector.
[* black] I used the same tool to work the other two connectors up out of the gimbal. I had to work them from side to side a little to free them.