メインコンテンツにスキップ

手順2に変更

Daniel Lanfordさんによる編集

編集が拒否されました。 : Walter Galan

変更なし

手順ライン

[* black] Remove the following 4 screws:
[* red] Two 3.3 mm silver Phillips screws on either side of the SuperDrive.
[* orange] One 4.7 mm silver T6 Torx screw from the top left corner of the drive.
- [* yellow] One 6.2 mm black Phillips screw at the top right corner of the drive.
+ [* yellow] One 6.2 mm black, #1 Phillips screw at the top right corner of the drive.
[* black] Lift the optical drive up and out of the computer.