メインコンテンツにスキップ

手順1に変更

Marc Jonesさんによる編集

承認の保留中

変更なし

手順ライン

[* blackicon_note] Place the computer monitor face down on a safe, harmless surface.
[* red] Using a Phillips #00 screw driver, remove the four 6.86 mm screws from bottom of facethe metal plate.
[* blackicon_note] Place the computer monitor face down on a safe, harmless surface.
[* red] Using a Phillips #00 screw driver, remove the four 6.86 mm screws from bottom of facethe metal plate.