修理を始めるには

修理する権利

ストア

手順10に変更

Miroslav Djuric — さんによる編集

承認の保留中

前
後
変更なし

手順ライン

[* black] Stop -- it's connector time! We remove a plethora (that's right, plethora, we're using our five dollar words) of connectors from the logic board, leaving only the brains behind the Thunderbolt port between us and the Display's control center.
[* black] A few T6 Torx screws are knocked out to remove the connector cover, and the Thunderbolt cable is disconnected.
[* red] Interestingly enough, the Thunderbolt cable hasthat routes into the display also plugs into a standard Thunderbolt connectorsocket on the logic board side as wellboard. Apple could have just soldered the cable wires to the board, but instead chose to implement a cover that prevents the cable from being detached from the logic boardboard's Thunderbolt socket.
[* red] Interestingly enough, the Thunderbolt cable hasthat routes into the display also plugs into a standard Thunderbolt connectorsocket on the logic board side as wellboard. Apple could have just soldered the cable wires to the board, but instead chose to implement a cover that prevents the cable from being detached from the logic boardboard's Thunderbolt socket.