メインコンテンツにスキップ

手順3に変更

Don Rosenthalさんによる編集

承認済みの編集 : Don Rosenthal

変更なし

手順ライン

[* black] Detach each (5) ribbon from camera motherboard.
-[* icon_note] Use tweezers to gently work with the ribbons.
+[* icon_note] To disconnect the cable, use the tip of a spudger or your fingernail to flip up the small retaining flap. Then, you can safely pull the ribbon cable out.
+[* icon_caution] Be sure you are prying up on the hinged retaining flap, not the connector itself.
+[* black] As the name implies, no force is needed to plug in or remove the cable.
+[* icon_reminder] The white line on this ribbon cable marks the edge of the connection area. To reinstall, insert the cable into the connector up to this line, and then close the retaining flap. If the cable doesn’t insert easily up to (or very near to) this line, it’s probably misaligned and needs to be gently removed and repositioned.