メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順8に変更

Phillip Takahashiさんによる編集

承認の保留中

変更なし

手順ライン

[* black] Place the threaded end of the oil filter onto the engine's oil filter threads, being careful to not get dirt or debri on the filter's seal.
[* black] Turn the filter clockwise by hand until it is snug. Tightening the filter should require a moderate amount of your strength, but not all of it.
[* icon_caution] If the filter is difficult to turn at the beginning of its threads, stop! You may be cross threading the oil filter. Re-align the oil filter and try again.
[* icon_caution] Do not over-tighten your oil filter by using a wrench. Doing so may cause the oil filter seal to leak and will make removing the oil filter very difficult in the future.
[* black] Remove the oil drain pan from under the truck

画像1

以前の画像はありません

追加

画像2

以前の画像はありません

追加