メインコンテンツにスキップ

手順 13 への変更

- Phillip Takahashiによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] Locate the oil dip stickdipstick. It is at the front of the engine along it's center line.
[* black] Remove the oil dip stickdipstick, wipe it off, place it all the way back into it's hole and remove again.
[* black] Observe the oil level on the end of the dip stickdipstick. It should be between the two holes. If the oil is above the top hole, oil needs to be removed. If the oil is below the bottom hole, or not visible, oil needs to be added.
[* black] Adjust oil level as necessary and place the dip stickdipstick back in it's hole when you are done.
[* black] Locate the oil dip stickdipstick. It is at the front of the engine along it's center line.
[* black] Remove the oil dip stickdipstick, wipe it off, place it all the way back into it's hole and remove again.
[* black] Observe the oil level on the end of the dip stickdipstick. It should be between the two holes. If the oil is above the top hole, oil needs to be removed. If the oil is below the bottom hole, or not visible, oil needs to be added.
[* black] Adjust oil level as necessary and place the dip stickdipstick back in it's hole when you are done.