メインコンテンツにスキップ

手順 13 への変更

- Phillip Takahashiによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] Locate the oil dip stick. It is at the front of the engine along it's center line.
[* black] Remove the oil dip stick, wipe it off, place it all the way back into it's hole and remove again.
[* black] Observe the oil level on the end of the dip stick. It should be between the two holes. If the oil is above the top hole, oil needs to be removed. If the oil is below the bottom holehole, or not visiblevisible, oil needs to be added.
[* black] Observe the oil level on the end of the dip stick. It should be between the two holes. If the oil is above the top hole, oil needs to be removed. If the oil is below the bottom holehole, or not visiblevisible, oil needs to be added.
[* black] Adjust oil level as necessary and place the dip stick back in it's hole when you are done.