メインコンテンツにスキップ

手順 13 への変更

- Phillip Takahashiによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] Locate the oil dipstick. It is at the front of the engine along it's center line.
[* black] Pull out the oil dipstick, wipe it off, place it all the way back into it's hole and remove again.
[* black] Observe the oil level on the end of the dipstick. It should be between the two holes. If the oil is above the top hole, some oil will need to be drained. If the oil is below the bottom hole, or not visible, oil needs to be added.
[* black] Adjust oil level as necessary and place the dipstick back in it's hole when you are done.

画像1

以前の画像はありません

追加

画像2

以前の画像はありません

追加