メインコンテンツにスキップ

手順 9 への変更

- Phillip Takahashiによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] Guide the new filter back up and around the drive shaft.
[* black] Place the threaded end of the oil filter onto the engine's oil filter threads and turn clockwise by hand until the filter is snug.
[* icon_caution] If the filter is difficult to turn at the beginning of it's threads '''stop'''! You may be cross threading the oil filter. Re-align the oil filter and try again.
[* icon_caution] Do not over-tighten the oil filter or you may strip the oil filter threads.
[* icon_caution] Do not over-tighten the oil filter or you may strip the oil filter threads.
[* black] Remove the oil drain pan out from under the car.