手順7に変更
Phillip Takahashi — さんによる編集
- 前
- 後
- 変更なし
手順ライン
[* black] To reach the oil filter, guide your hand around the back side of the drive axle and up toward the top of the engine. |
[* icon_caution] Be careful if the engine has been running recently. The engine and exhaust components may be very hot. |
[* black] Twist the oil filter counter-clockwise with your hand until it comes off the threads on the engine block. |
[* icon_note] If the filter is too tight to loosen by hand, use an oil filter wrench. A wrench that fits over the top of the oil filter is |
[* icon_note] If the filter is too tight to loosen by hand, use an oil filter wrench. A wrench that fits over the top of the oil filter is |
[* black] Lower the oil filter out of the engine bay with the threads facing up, then place it in the oil drain pan with the threads facing down. |
[* black] Wipe off as much spilled oil as possible. |