メインコンテンツにスキップ

手順 7 への変更

- Phillip Takahashiによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] To reach the oil filter, guide your hand around the back side of the drive axle and up toward the top of the engine.
[* icon_caution] Be careful if the engine has been running recently. The engine and exhaust components may be very hot.
[* black] Twist the oil filter counter-clockwise with your hand until it comes off the threadsthreads on the engine block.
[* black] Twist the oil filter counter-clockwise with your hand until it comes off the threadsthreads on the engine block.
[* icon_note] If the filter is too tight to loosen by hand, use an oil filter wrench. A wrench that fits over the top of the oil filter is necessary as there is very little space on the sides of the oil filter.
[* black] Lower the oil filter out of the engine bay with the threads facing up, henthen place it in the oil drain pan with the threads facing down.
[* black] Lower the oil filter out of the engine bay with the threads facing up, henthen place it in the oil drain pan with the threads facing down.
[* black] Wipe off as much spilled oil as possible.