メインコンテンツにスキップ

手順 2 への変更

- Phillip Takahashiによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] Place the jack under the jacking point and begin lifting the front of the car. Lift the car until you can fit underneath it.
[* black] Place the jack stand under the jack stand point.
[* black] Slowly lower the jack until the jack stand is supporting the car and the jack isn't. Remove the jack.
[* icon_note] It is helpful, but not necessary, to jack up both sides of the car. Since the oil drain plug is on the driver's side of the car, lifting just the driver's side should be sufficient.
[* icon_note] Many hydraulic jacks are lowered by placing the open end of the handle over a knob and turning it counter-clockwise. Consult your owners manual for your jack if you don't know how to lower it.
[* icon_caution] '''Never''' work underneath a car that is only supported by a jack. The jack may slip or failfail, resulting in serious injury or death.
[* icon_caution] '''Never''' work underneath a car that is only supported by a jack. The jack may slip or failfail, resulting in serious injury or death.