メインコンテンツにスキップ

手順 2 への変更

- Phillip Takahashiによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] Place the jack under the jacking point and begin lifting the front of the car. Lift the car until you can fit underneath it.
[* black] Place the jack stand under the jack stand point.
[* black] Slowly lower the jack until the jack stand is supporting the car and the jack isn't. Remove the jack.
[* icon_note] Many hydraulic jacks are lowered by placing the open end of the handle over a knob and turning it counter-clockwise. Consult your owners manual for your jack if you don't know how to lower it.
[* blackicon_caution] '''Never''' work underneath a car that is only supported by a jack, The jack may slip or fail resulting in serious injury or death.
[* blackicon_caution] '''Never''' work underneath a car that is only supported by a jack, The jack may slip or fail resulting in serious injury or death.