メインコンテンツにスキップ

手順10に変更

Brett Harttさんによる編集

承認の保留中

変更なし

手順ライン

-[* black] Insert wisdom here.
+[* black] Position the screw of a large C clamp so that the head of the screw is pressing against the inside of the brake piston.
+[* black] Slowly tighten the C clamp, forcing the brake piston back into the brake cylinder until it is completely depressed.
+[* icon_caution] Make sure that you work slowly, or else the piston will force brake fluid out of the master reservoir and all over the motorcycle.
+[* icon_note] It is possible to use your hands rather than a C clamp, although it is much more difficult.