メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順3に変更

Patrick Demorestさんによる編集

承認済みの編集 : Patrick Demorest

変更なし

手順ライン

[* black] Flip the monitor around now and locate the two slots on the edges. These slots would be below the screen where the faceplate is attached.
[* black] Use a flat tool (such as a flathead screwdriver) to pop the front frame off. It is attached via plastic snaplocks and will come off with some prying.
[* black] Once the faceplate is removed, the monitor can then be removed from the housing, leaving just the monitor and the faceplate attached with a ribbon wire. The wire can now be pulled from the slot, fully removing the faceplate from the monitor.

画像1

以前の画像はありません

追加

画像2

以前の画像はありません

追加