手順36に変更
- David Hodsonによって編集
- 前
- 後
- 変更なし
手順ライン
| - | [* black] Use cutting pliers to cut one of the surface-mounted leads down to a length where you can bend it through the nearest hole in the battery contact with about 6 or 7 millimeters left over. |
|---|---|
| - | [* black] After bending the lead through the hole, use the same through-hole soldering technique as earlier to solder the battery lead to the hole in the battery contact. |
| + | [* black] Use a pair of cutting pliers to remove about an inch of the positive terminal surface mount wire leads. |
| + | [* black] Bend the wire lead around and through the positive ring terminal on the battery compartment. |
| + | [* black] Use your now perfected through-hole soldering skills to solder the wire lead to the battery terminal. |
| + | [* black] Cut any excess wire from the lead. |