手順36に変更
- Jake Devincenziによって編集
- 前
- 後
- 変更なし
手順ライン
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] Use wire cutters to cut the outer surface-mounted lead down to a length where you can bend it through the nearest hole in the battery contact with about 6 or 7 mm left over. |
| + | [* black] After bending the lead through the hole, use the same through-hole soldering technique as earlier to solder the battery lead to the hole in the battery contact. |