手順35に変更
- David Hodsonによって編集
- 前
- 後
- 変更なし
手順ライン
| [* black] Use a spudger to pry the metal rings on the battery terminals up so that they perpendicular to the battery terminals. | |
| - | [* icon_note] These rings should be on the same end as the surface mount leads. If they are on opposite ends, the board is on backwards |
| + | [* icon_note] These rings should be on the same end as the surface mount leads. If they are on opposite ends, the board is on backwards, and you'll need to unscrew the nuts, rotate the circuit board 180°, reinstall the nuts, and tighten the two screws. |