手順35に変更
- Jake Devincenziによって編集
- 前
- 後
- 変更なし
手順ライン
| [* black] Use a plastic spudger to pry the metal rings on the battery connectors up so that they are vertical. | |
| - | [* icon_note] These should be on the same end as the leads sticking out the sides of the circuit board. If they are on the opposite end, |
| + | [* icon_note] These should be on the same end as the leads sticking out the sides of the circuit board. If they are on the opposite end, the board is on backwards. Unscrew the nuts and flip the board around. |