手順28に変更
- David Hodsonによって編集
- 前
- 後
- 変更なし
手順ライン
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] No, you weren't ripped off, those two leads aren't supposed to have any components in the middle of them. |
| + | [* black] To solder the battery leads to the circuit board, set the tip of the soldering iron on the solder that's on the positive pad. |
| + | [* black] When the solder begins to melt again, quickly insert the end of the lead into the melted solder. |
| + | [* black] Remove the soldering iron and let the solder cool around the lead. |
| + | [* icon_note] You can melt the solder again or add more solder if you don't get it right the first time. |