手順20に変更
- Jake Devincenziによって編集
- 前
- 後
- 変更なし
手順ライン
| - | [* black] The next components to install are the LEDs. Light |
|---|---|
| + | [* black] The next components to install are the LEDs. Light Emitting Diodes are used in all sorts of electronics to provide bright, different colored lights. |
| [* icon_note] Note that the two leads are different lengths. Since an LED is a diode, it only allows current to travel in one direction, so it is important to install the correct lead in the correct hole. | |
| [* red] The four LEDs belong in each of the four terminals marked LD1 through LD4. | |
| [* black] When installing the LEDs, insert the shorter of the two leads into the hole next to the flat part of the printed circle. |