手順19に変更
- David Hodsonによって編集
- 前
- 後
- 変更なし
手順ライン
| - | [* black] The next component we will be installing is the yellow capacitor. Capacitors store electrical |
|---|---|
| + | [* black] The next component we will be installing is the yellow capacitor. Capacitors store electrical charge, and are helpful when a circuit needs a quick shot of energy to illuminate a light or make a beep. |
| [* black] Capacitors are measured (in Farads) as the ratio of the electrical charge on each conductor to the potential difference between them. This capacitor is a 1 µF capacitor. | |
| [* red] Install the capacitor in the terminal next to the IC socket marked ***C1***. Soldering the leads of a capacitor follows the same through-hole procedure used thus far. | |
| [* icon_note] Make sure that the printed markings on the capacitor face away from the IC socket so that you can still read it. |