手順14に変更
- Jake Devincenziによって編集
- 前
- 後
- 変更なし
手順ライン
| - | [* red] Bend the leads of the small red diode and insert |
|---|---|
| + | [* red] Bend the leads of the small red diode and insert them into the terminal marked D1. |
| [* icon_note] Make sure that the cathode (marked by a small black band) lines up with the white stripe on the circuit board. | |
| [* black] Use the same method you used to solder the resistors to the board to install the diode. |