手順12に変更
- David Hodsonによって編集
- 前
- 後
- 変更なし
手順ライン
| - | [* black] Locate your single yellow/violet/black/gold 47 ohm resistor. |
|---|---|
| - | [* red] Like you did with the first six resistors, bend the leads and place them through the holes around the rectangle marked R7. |
| - | [* black] Solder the joints. |
| + | [* black] Locate your single yellow/violet/black/gold resistor (47 Ohm). |
| + | [* red] Install this resistor into the terminal marked R7 on the circuit board. |