手順11に変更
- Jake Devincenziによって編集
- 前
- 後
- 変更なし
手順ライン
| [* black] Fish the two yellow/violet/red resistors out of your kit. | |
| [* icon_note] Consulting our resistor color code chart tells us that these resistors have a 4,700 ohm resistance. | |
| - | [* red] Install these two resistors into the R5 and R6 terminals on the circuit board. |
| + | [* red] Install these two resistors into the ***R5*** and ***R6*** terminals on the circuit board. |