手順11に変更
- Jake Devincenziによって編集
- 前
- 後
- 変更なし
手順ライン
| [* black] Fish the two yellow/violet/red resistors out of your kit. | |
| - | [* icon_note] Consulting our resistor color code chart tells us that these resistors have a 4,700 |
| + | [* icon_note] Consulting our resistor color code chart tells us that these resistors have a 4,700 ohm resistance. |
| [* red] Install these two resistors into the R5 and R6 terminals on the circuit board. |