手順6に変更
- David Hodsonによって編集
- 前
- 後
- 変更なし
手順ライン
| [* black] Here we are: the moment of truth. It's time to get that solder flowing. | |
| [* black] Set the tip of the soldering iron on the two parts to be connected. In this case, that's the resistor lead and the copper lead on the circuit board. | |
| [* black] Touch your solder to the tip of your soldering iron to melt it onto the joint. Don't hold it there for more than a second or two. | |
| [* black] Quickly--but not frantically--pull both the soldering iron and the solder away from the joint. | |
| - | [* black] Your solder should be shiny and conical |
| + | [* black] Your solder joint should be shiny and conical, and not expand beyond the copper surface lead. |