手順3に変更
- David Hodsonによって編集
- 前
- 後
- 変更なし
手順ライン
| [* black] We'll start with resistor R1 in your kit, which has yellow, purple, brown, and gold rings on it (more on what these colored rings mean later). | |
| [* black] Bend the leads of the resistor to 90^^o^^ angles about 1.5 mm away from the body of the resistor. | |
| - | [* icon_note] You may also bend the leads outward to hold the resistor in place, but this is not necessary. As per NASA guidelines, any angle up to 30^^o^^ down from vertical is acceptable. |