手順2に変更
手順ライン
| + | [title] Prep for repair |
|---|---|
| [* black] After cleaning up the board and reseating new socket I simply resoldered in place. Now with the new socket installed, I needed to connect the unsoldered lead to the data port on board. | |
| [* icon_note] To find where the trace/lead went to I went to the Internet to find where it connected. I found many usable images to determine the path. | |
| [* black] To remove the coating on the board where I needed to solder , I scrapped away the coating with an Xacto knife. |