メインコンテンツにスキップ

手順 2 への変更

- Daniel Eaganによって編集

承認済みの編集 : Daniel Eagan

削除
追加
変更なし

手順ライン

[* black] Then next step is removing the seven Philips #00 screws that hold the rear face plate on.
[* black] There are screws hidden in three separate spots.
[* black] One is under the rubber doors on the left side of the camera. the next one is next toat the eye hole that you removed earlierhole.
[* black] One is under the rubber doors on the left side of the camera. the next one is next toat the eye hole that you removed earlierhole.
[* black] The final one involves taking off the small dial that is about half an inch to the right of the eye hole.
[* black] Removing this dial involves putting a spungder tool behind it and applying a gradual amount of pressure to pry it offpressure.
[* black] Removing this dial involves putting a spungder tool behind it and applying a gradual amount of pressure to pry it offpressure.