メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

手順2に変更

Alexander De La Cruzさんによる編集

承認済みの編集 : Alexander De La Cruz

変更なし

手順ライン

[* black] After removing the ribbon cables, take note of the screws holding the motherboard into the main chassis of the camera.
[* blackred] There are two types of screws to remove. The four circled in red have a fat head, and go in the gold contact.
[* green]
The three screws marked in green have a skinny head.
[* black] Use the iFIXITIFIXIT screwdriver and a PH0 bit to remove all the screws holding in the motherboard.
[* blackred] There are two types of screws to remove. The four circled in red have a fat head, and go in the gold contact.
[* green]
The three screws marked in green have a skinny head.
[* black] Use the iFIXITIFIXIT screwdriver and a PH0 bit to remove all the screws holding in the motherboard.