メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

手順2に変更

Timothy Protoさんによる編集

承認済みの編集 : Timothy Proto

変更なし

手順ライン

[* black] After removing the ribbon cablescables, take note of the screws holding the motherboard into the main chassis of the camera.
[* black] There are two types of screws to remove,remove. The four screwscircled in red have a fat head, whichand go in the gold contact circlescontact. The three screws marked in red, three screwsgreen have a skinny head and are marked in greenhead.
[* black] UsingUse the IFIXITiFIXIT screwdriver and a PH0 bit to remove all the screws holding in the motherboard.
[* black] After removing the ribbon cablescables, take note of the screws holding the motherboard into the main chassis of the camera.
[* black] There are two types of screws to remove,remove. The four screwscircled in red have a fat head, whichand go in the gold contact circlescontact. The three screws marked in red, three screwsgreen have a skinny head and are marked in greenhead.
[* black] UsingUse the IFIXITiFIXIT screwdriver and a PH0 bit to remove all the screws holding in the motherboard.