メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

手順2に変更

Timothy Protoさんによる編集

承認済みの編集 : Timothy Proto

変更なし

手順ライン

[* black] After removing the ribbon cables, take note of the screws holding the motherboard into the main chassis of the camera.
[* red] There are two types of screws to remove. The four (2mm, PH00) circled in red have a fat head, and go in the gold contact.
[* greenorange] The three (4mm, PH00) screws marked in green have a skinny head.
[* greenorange] The three (4mm, PH00) screws marked in green have a skinny head.
[* black] Use the IFIXIT screwdriver and PH0 bit to remove all the screws holding the motherboard.

画像1

古いバージョン

新しいバージョン