メインコンテンツにスキップ

手順 1 への変更

- Miroslav Djuricによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] Remove the hard drive rubber side protectors from the drive sides.
[* black] Use a small iPod opening tool to release the black hinge holding the hard drive ribbon cable.
[* black] Use your forefinger to hold the ribbon cable in place; separatedisconnect the drive from the ribbon cable.
[* icon_cautionicon_note] Make sure the hard drive rubber side bumpers are put back onattached to the drive before reinstalling itbeing installed. Use the hard drive rubber side bumper installation guide to accomplish this task.
[* icon_note] If necessary, the blue foam padding on the hard drive might also need to be transferred to the replacement drive.
[* black] Use your forefinger to hold the ribbon cable in place; separatedisconnect the drive from the ribbon cable.
[* icon_cautionicon_note] Make sure the hard drive rubber side bumpers are put back onattached to the drive before reinstalling itbeing installed. Use the hard drive rubber side bumper installation guide to accomplish this task.
[* icon_note] If necessary, the blue foam padding on the hard drive might also need to be transferred to the replacement drive.