メインコンテンツにスキップ

手順 1 への変更

- Miroslav Djuricによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] StuffRemove the hard drive rubber side protectors from the drive sides.
[* black] Use a small iPod opening tool to release the black hinge holding the hard drive ribbon cable.
[* black] Use your forefinger to hold the ribbon cable in place; separate the drive from the ribbon cable.
[* icon_caution] Make sure the hard drive rubber side bumpers are put back on the drive before reinstalling it. Use the hard drive rubber side bumper installation guide to accomplish this task.
[* black] StuffRemove the hard drive rubber side protectors from the drive sides.
[* black] Use a small iPod opening tool to release the black hinge holding the hard drive ribbon cable.
[* black] Use your forefinger to hold the ribbon cable in place; separate the drive from the ribbon cable.
[* icon_caution] Make sure the hard drive rubber side bumpers are put back on the drive before reinstalling it. Use the hard drive rubber side bumper installation guide to accomplish this task.

画像1

以前の画像はありません

追加

画像2

以前の画像はありません

追加