手順3に変更
手順ライン
| - | [* black] Using a flathead screwdriver, carefully remove the brush caps as they are spring loaded. |
|---|---|
| - | [* red] Using T-15 screwdriver tip, remove the 5 screws (12.5 mm) that hold the casing together. |
| + | [* black] Remove the brush caps by using a flathead screwdriver bit. |
| + | [* icon_note] The brush caps are spring loaded. |
| + | [* red] Using the Torx 15 screwdriver tip, remove the 5 screws (12.5 mm) that hold the casing together. |