メインコンテンツにスキップ

手順 5 への変更

- Jeff Suovanenによって編集

承認済みの編集 : Jeff Suovanen

削除
追加
変更なし

手順ライン

[* red] Remove two of the three 6 mm T6 Torx screws securing the left side of the display to the upper case.
[* icon_note] We purposely have you leave one screw attaching the display to the upper case to aid in future steps.
[* black] '''Reassembly Tip:'''icon_reminder] The display assembly and notebookMacBook body can be subtly misaligned on reassembly. With all six T6 Torx screws are in place and the notebook closed, check for alignment, and loosenalignment. Loosen these six screws to correct the alignment if necessarynecessary, and then re-tighten them.
[* black] '''Reassembly Tip:'''icon_reminder] The display assembly and notebookMacBook body can be subtly misaligned on reassembly. With all six T6 Torx screws are in place and the notebook closed, check for alignment, and loosenalignment. Loosen these six screws to correct the alignment if necessarynecessary, and then re-tighten them.