メインコンテンツにスキップ

手順 3 への変更

- jafafaによって編集

承認済みの編集 : Andrew Optimus Goldheart

削除
追加
変更なし

手順ライン

[* black] Grab the plastic pull tab secured to the display data cable lock and rotate it up and over the connector, toward the DC-In side of the computer.
[* black] Grab the plastic pull tab secured to the display data cable lock and rotate it up and over the connector, toward the DC-In side of the computer.
[* black] Pull the display data cable straight back (not up) out of its socket on the logic board.
[* icon_note] Do not lift up on the display data cable, as its socket is very fragile. Pull the cable parallel to the face of the logic board.