メインコンテンツにスキップ

この手順に変更

- Ian Mitchellによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] On the left side of the phone, there are three copper colored clips.
[* black] Unclip the bottom, thread the middle through the logic board, and pull the top one out gently.
[* black] You can then lift the logic board out of the phone.
[* icon_note] Do this at an angle, lifting the side to the right of the SIM card instructions.
[* icon_caution] One of the strips is attached to the front of the case, and goes through the logic board. Be careful not to break this piece.

画像1

以前の画像はありません

追加

画像2

以前の画像はありません

追加