メインコンテンツにスキップ

この手順に変更

- Mandy Pedersonによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] ThereAfter removing the rubber stoppers on top, there should be six exposed screws. Remove thesethese using the T6 screwdriver.
[* black] Next, use a toolthe spudger to loosen the case. Itcase underneath the shiny metal edge. Go all the way around the phone until completely loosened.
[* icon_note] The case
is superglued onon and will not permanently damage the phone when removed, but you should still use caution. Be firm, but gentle.
[* black] After loosening the case, remove it. Be very cautious, as there
[* icon_caution] There
is a wire that connects both the top and bottom of the case. If you are not carefulcareful when removing the case, you might snap the wire.
[* black] ThereAfter removing the rubber stoppers on top, there should be six exposed screws. Remove thesethese using the T6 screwdriver.
[* black] Next, use a toolthe spudger to loosen the case. Itcase underneath the shiny metal edge. Go all the way around the phone until completely loosened.
[* icon_note] The case
is superglued onon and will not permanently damage the phone when removed, but you should still use caution. Be firm, but gentle.
[* black] After loosening the case, remove it. Be very cautious, as there
[* icon_caution] There
is a wire that connects both the top and bottom of the case. If you are not carefulcareful when removing the case, you might snap the wire.