メインコンテンツにスキップ

手順4に変更

Pedro Semeanoさんによる編集

承認済みの編集 : Pedro Semeano

変更なし

手順ライン

[title] Replace the capacitor
-[* black] I used a 1000uF 25V that I've removed from an old CRT monitor, but the recommended one is a 1000uF 16V or 1000uF 10V (like the original).
+[* icon_caution] The capacitor has a right position. Mind the markings on the capacitor and the board, they must match.
+[* icon_note] I used a 1000uF 25V that I've removed from an old CRT monitor, but the recommended one is a 1000uF 16V or 1000uF 10V (like the original).
[* black] Using the soldering iron, desolder the faulty capacitor and solder a new one.

画像1

以前の画像はありません

追加