メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順1に変更

Mackenzie Billingsさんによる編集

承認の保留中

変更なし

手順ライン

[* black] Remove printer carriage cover by unscrewing 4 black coarse thread T-10 torx screws, marked with red circlesscrews (circled in red).
[* black] After the screws are removed, depressDepress plastic tabs (shownboxed in yellow) to release the cover from the sides.
[* black] The cover will now come off, and the feed rollers will be accessible.

[* icon_note] '''Note:''' At this point you should also remove the left side panel. It will simplySimply lift off since thereit to remove; there is nothing left holding it in place.
[* black] Remove printer carriage cover by unscrewing 4 black coarse thread T-10 torx screws, marked with red circlesscrews (circled in red).
[* black] After the screws are removed, depressDepress plastic tabs (shownboxed in yellow) to release the cover from the sides.
[* black] The cover will now come off, and the feed rollers will be accessible.

[* icon_note] '''Note:''' At this point you should also remove the left side panel. It will simplySimply lift off since thereit to remove; there is nothing left holding it in place.