メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順1に変更

Hilary Olsenさんによる編集

承認の保留中

変更なし

手順ライン

[* black] Remove printer carriage cover by unscrewing 4 black coarse thread T-10 torx screws, marked with red circles.
[* black] fterAfter the screws are removedremoved, depress plastic tabs (shown in yellow) to release the cover from the sides, shown in yellowsides.
[* black] fterAfter the screws are removedremoved, depress plastic tabs (shown in yellow) to release the cover from the sides, shown in yellowsides.
[* black] The cover will now come off, and the feed rollers will be accessible.
[* icon_note] '''NoteNote:''' At this point you should also remove the left side panel. It will simply lift off since there is nothing left holding it in place.
[* icon_note] '''NoteNote:''' At this point you should also remove the left side panel. It will simply lift off since there is nothing left holding it in place.