手順1に変更
手順ライン
| + | [* black] After removing the board you will see a cover on one side of the chargerport (i had already done it before i decided to take pictures). Highly recomend using a smd rework heat gun for this step as the cover is soldered to the motherboard. ( did not know this at the time and you can see that from the pictures. |
|---|---|
| + | [* black] REMOVE BATTERY IF USING HEAT GUN. Also remember to be careful of other components around the cover. Using heat resistant tape is highly recommended to cover components. |
画像1
以前の画像はありません
追加
画像2
以前の画像はありません
追加