メインコンテンツにスキップ

手順3に変更

Allie Menardさんによる編集

承認の保留中

変更なし

手順ライン

-[* yellow] Using tweezers, remove the digital drive board cable - the cable set on the right with black, red, green, and white wires - and the rigth speaker cable - the cable set on the left with red and black wires - by pulling the white connector towards you.
+[* yellow] Using tweezers, remove the digital drive board cable - the cable set on the right with black, red, green, and white wires.
+[* yellow] Using tweezers, remove the the rigth speaker cable - the cable set on the left with red and black wires - by pulling the white connector towards you.