メインコンテンツにスキップ

手順1に変更

Andrew Bookholtさんによる編集

承認の保留中

変更なし

手順ライン

+[* black] Use a spudger to carefully disconnect the microphone cable from the logic board. You'll want to work from side to side, and slowly wiggle the connector out of its socket.
+[* icon_caution] Pulling on this connector vertically will break the socket off the logic board. This connector should be removed horizontally by gently pulling the microphone cable toward the screen while working a spudger between the connector and the socket.

画像1

以前の画像はありません

追加